2018 Hyster S50FT

2018 Hyster S50FT Forklift

Experience the power and efficiency of the 2020 Hyster S50FT Forklift. This LP Gas forklift is designed for optimal performance in various warehouse applications. With a load capacity of 5000 lbs and a 3-stage full free lift mast, it ensures smooth and efficient material handling. Equipped with a side shifter and solid tires, it offers excellent maneuverability and ease of operation. The ergonomic design and robust construction make it a reliable and cost-effective solution for your material handling needs.

SPEC SHEET

• General SpecificationsModel: Hyster S50FT
• Type: LPG Forklift
• Load Capacity: 5,000 lbs
• Load Center: 24 inches
• DimensionsOverall Length: 91.2 inches
• Overall Width: 45 inches
• Height to Top of Overhead Guard: 84 inches
• Wheelbase: 58 inches
• Ground Clearance: 4 inches
• Engine SpecificationsEngine Model: PSI 2.4L
• Engine Type: 4-Cylinder LPG
• Power: Approximately 63 HP
• Displacement: 2.4 liters
• Mast SpecificationsMast Type: 2-Stage (standard)
• Lift Height: 127 inches (standard)
• Free Lift Height: 5 inches
• TiresType: Cushion
• Front Tires: 21x7x15
• Rear Tires: 16x5x10.5
• PerformanceTravel Speed: 11.1 mph (loaded)
• Lift Speed: 105 feet per minute (loaded)
• Lowering Speed: 98 feet per minute (loaded)
• Gradeability: 35% (laden)
• Fuel SystemFuel Type: LPG
• Fuel Capacity: Standard 33.5 lb tank
• Other FeaturesSteering: Power steering
• Transmission: Electronic powershift
• Manufacturer's Warranty: Typically 12 months or 2,000 hours

LEGAL NOTICE:

• The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate.
• This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors.
• We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer.
• The information presented should not be considered definitive or relied upon as the sole basis for decision-making.
• In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example:
• Masts and forks are routinely changed or updated.
• Headlights, taillights, and backup alarms are usually included with new equipment but can be removed over time.
• Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided.
• By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided.
• For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.